Ingredients: imported acrylic emulsion, pigment, imported accessory ingredients and water
Coat appearance：matte
Features：smooth coating layer, strong adhesive force, no stripping off and cracking, strong covering power, excellent scrubbing resistance and water resistance, simple construction.
Construction methods：roller, brush and spray coating
Application instructions：Construction temperature：above 5℃
Recoating time：above 2 hours（25℃）
Dilution status：at most 15%-20% of water（W：W）use after stirring uniformly
Paint consumption：theoretical value ：10-12m2 /L
Storage requirements：stored in 0-35℃dry and cool conditions
Application range：cement plaster surface, brick structure, asbestos board, timber surface and plaster board
Construction requirements：water addition amount should be the same for every bucket; the coat should be thin and uniform.
Performance index：status in the container: no hard lump and uniform
Alkali resistance：24h
Scrubbing resistance：≥1000 times
Contrast ratio：≥0.91
Basic requirements：basic layer must be dry, no oil, grease and other attaching substances. For new wall, recommend brushing VD-6000 seal primer and coating finishing coat twice. Use high pressure water to wash for loose paint film or use the scraper to remove. The temperature of wall body is below 10%; PH≤10
Executive standard：GB/T9756-2001 GB18582-2001
Shelf life ：12 months